Paints and Coating
Paints, Inks, Adhesives, Sealants,
Resins, Construction Chemicals &
Allied Industry
Turnkey Projects
We also undertake TURNKEY PROJECTS
for PAINTS & RESINS by providing
KNOW-HOW and FEASIBILITY REPORT
alongwith MACHINE as per following
details :
Solvent Based Paints based on Alkyds
Non Drip Gloss Emulsion Paints, Satin Emulsion Paints,
Matt Emulsion Paints for Interior and Exterior, Primer Sealer,
Clear Glaze, Texture Rulatto, Graffiato, Putty (Stuco), Italian Rulatto
Industrial Paints
Chlorinated Rubber Paints, Chemical Resistance Paints, Heat and
Fire Resisting Paints, Polychromatic Paints, Furniture Enamels,
Hammer Tone Finishes, Wuick Drying Paints, Thermosetting Paints,
Thermoplastic Paints, Tennis Court Paints, Floor Coating,
Protective Coatings for Metals, Road Marking Paints
Paints for Automotive
Metallic & Non-metallic Base Coats, Clear Coats, Sound Deadners /
Underbodyseal Compounds, Auto Refinishing Paints / Touchup Paints
High Performance Coating
Epoxy Based Primers / Paints (Two Pack System), Polyurethane Coatings,
Zinc Rich Coatings, Road Marking Paints
Marine Paints for Ocean Vessel & Containers
Primers, Sealer, Undercoat, Topcoat etc.
NC Paints
Putty, Surfaces, Sanding Sealer, Lacquer Gloss Pigmented and Clear,
Flat N C Paints
Powder Paints
Matt, Semi Glossy, Glossy
Thinners
Thinners for N C Paints and Lacquers, Thinner for P U Paints and Lacquers,
Thinners for General Purpose Enamels (G P Thinner), Thinner for Epoxy Paints,
Thinners for Furniture Enamels, All other Thinners like Drying Retarder etc.
Resins
Alkyd Resins, Emulsion Resins, Epoxy Resins, Polyurethane Resins,
Printing Inks & Multipurpose plants
Putty Mixer
Putty Mixer is excellent for mixing of puttles and high viscos0ty
material. The discharge is from the bottom Valve. Two shafts
run in opposite directlons. The shafts are mounted on bearlng
blocks. The blades are fabricated from plates and are clamped
onto the shaft for easy malntenance. The fnal drive run
through rear gears in an oil bath. The entire machine Is Atted on
a sturdy frame fabricated to minlmize vibratlons.
ADVANTAGES
- Higher productivity
- Improved quality
- Power and cost saving
- Capacity : Batch size ranging from 100-5000 kgs.
Sigma Kneader
Excellent for kneading and mixing of highly viscous materials
like dough, putty, rubber solutions, adhesives, polymers etc.
The mixing action s a combination of smearing, stretching,
folding, dividing and recombing as the material is processed
between the sigma blades and the container walls. Jacket
arrangement is provided for heating or cooling application. In
bigger models the container is tilted by a hydraulic cylinder to
ensure complete discharge of mass.
Edge Runner
For mixing of foundry chemicals, pastes, moulding sand,
foundry fiuxes, food colours etc. Excellent where an amount of
binder or agglomerate is to be blended into the material. Also
used for densification of the mix. The pan is stationery inside
which rotate heavy duty mullers / rollers. The heavy wide
rollers ride over the material where intensive crushing, shearing
and mbxdng acúon takes place. Scrappers and ploughs are
provided for directing the mass into the path of the rollers. The
machine is also available with granite rolls and pan.
Ball Mill
One of the oldest and safest methods of grinding of a wide
range of materials of hardness upto 8 on mohs scale. Can be
used for grinding of practically any material wet, dry or sticky.
Conical Blender
Used for smooth and gentle blending of dense powders and abrasive materlal. Thls machlne can handle large volumes and is easlly cleaned. Separately drlven internal lump breakers can be provided for breaking of lumps and agglomerates. The unit conslst of two cylindrlcal cones welded together and fitted with shafts mounted on bearings. The blender is rotated at slow RPM because of whlch the entire mass Is tumbled along the
angle of the cone resulting In crls crossing of the material to
produce a unlform mlx. Baffles are provided inside the cone for
thorough mlxing.
High Speed Emulsifier
High Speed Emulsifiers suitable for Mixing, Dispersing, Homogenizing & Shearing of viscous liquids and pastes used in
the Chemical, Pharmaceutical, Food, Paint & Ink Industry. The
unit consists of a centrally located shaft coupled to a flanged
type motor mounted on a steel housing. The shaft is provided
with a Shear type cowless blade for quick & efficient processing
of the material. Tie rods are provided for stability of the unit
along with a mounting bracket to suspend the unit.
NOTE : A lifting and lowering stand can be provided at an extra cost.
Paint Filling Machine
Paint Filling machine suitable for filling of 30 Ltrs/min of Paint/
Distemper in Tins or Pouches. The machine is also suitable for
filling 1 and 4 Itrs cans. The machine is complete with SS 304
Contact parts 8 an electronic counter, one set of spare ‘O
rings. The machine is provided with a S.S. 304, 40 liters
capacity hopper for paint. The paint is to be fed / pumped into
the hopper after straining if necessary. The machine is driven
0.75 HP, 440 VAC, 3 Phase, and 50 Hz electric motor. The
machine is provided with an electronic, two digits and digital
preset counter for multi stroke filling. Thus the operator can
preset the number of strokes to be filled on the counter
enabling the machine to fill quantities upto 99 liters/kgs.
Machine stroke can be set at say 1.0 kg per stroke and the
counter at 05 strokes. Therefore the machine, once actuated,
can fill 5.0 kgs & stop in each cycle.
Accuracy+/-0.5%. Filling capacity / stroke 200 to 1100 cc
adjustable. Actuation By foot switch. Overall dimensions 500 mm Wx
600 mm Lx 1500 mm H.
LOADING & UNLOADING Manual. Nominal speeds 30 strokes per
minute.
Can Seaming Machine
Frigmaires Can Seaming machines is suitable for seaming cans
ranging from 1 Itr Cap to 30 Itrs Cap. The machine is semi
Automatic and can seam approx 150/200 Cans per hour.
Vibro Shifter
Is a highly effclent modular deslgned machlne whlch Imparts
three dlrectlonal vlbratlons on the screens. It Is deslgned for all
types of screening appllcatlons. The unlt Is un by a unbalanced
vibrating motor wBth shafts at both ends., The machlne Is
available In a number of decks and mesh slzes depending on the
applicatBon, Output can be vared by slmple ad<ustment of
unbalanced weights on motor shafts, Unlts wlth dust covers are
available to prevent dusting. All parts are easlly removable and
replaceable for manufacture.
Gyro Shaker
Machine is useful for blending a variety of paints, plasters,
lacquers, spackling compounds, chemicals and many other
hard to mix compounds in a very short time say 2-3 minutes.
The machine enables effective mixing, uniform blending and
homogenous mixing. The machines are maintenance free
reliable and guarantees smooth and trouble free operation.
Bail Out Press
These units are used for discharging of high viscosity materials
which do not flow by gravity nor are punpable. After mixing of
the materials the vessel is brought under the pressing lid and
locked into the position. The pressing lid is activated and
moved downwards by a hydraulic cylinder. The pressure of the
lid on the surface of the material forces the material out from
the bottom discharge valve. The discharge can be synchronised
wich the filling head of a packing machine
Resin Plant
∎ Alkyd Resins ■ Emulsion Resins ∎ Epoxy Resins
∎ Polyurethane Resins ∎ Printing Inks
∎ Multipurpose plant
Following Standards are incorporated:
- The speclal design of the azeotropic distllation system resulting in energy saving, batch tme reducing and the prevention ofdistillation system foullng
- The speclal design of the reactor agítator system for an efficient Agitatlon effect and optimum heat transfer. The single point process control for a comfortable plant operation. atimum process operation and reproducible product characteristics. Multipurpose plant ie complete erection and testing facility prior to dispatch including all lities
- he complete erection team to install the plant at your site.
Base Oil Tanks
structural work
A resin plant mainly consists of the following equipment :
- Charge equipment for liquid materials with tank balances for reactor and dilution tank with automatic charge valves.
- Charge equipment with solid raw material with bag and biobag discharge unit, feed hopper installed on a tank balance for reactor and hopper discharge systems like screw feeder or rotary valve.
- Reaction equipment with reactor, reactor agitator and distillation system.
- Reaction equipment with vacuum pump
- Heating and cooling circuit with circulation pump, heat exchanger and control valves.
- Dilution equipment with dilution tank, agitator and reflux condenser
- Filter equipment with produt pump and product filter.
- Sample batch laboratory plant.
- Process control equipment and instrumentation with data Loggers. PID Controllers and control boards for all equipment with alarm systems.
Resin Plant
∎ Alkyd Resins ■ Emulsion Resins ∎ Epoxy Resins
∎ Polyurethane Resins ∎ Printing Inks
∎ Multipurpose plant
Following Standards are incorporated:
- The speclal design of the azeotropic distllation system resulting in energy saving, batch tme reducing and the prevention ofdistillation system foullng
- The speclal design of the reactor agítator system for an efficient Agitatlon effect and optimum heat transfer. The single point process control for a comfortable plant operation. atimum process operation and reproducible product characteristics. Multipurpose plant ie complete erection and testing facility prior to dispatch including all lities
- he complete erection team to install the plant at your site.
A resin plant mainly consists of the following equipment :
- Charge equipment for liquid materials with tank balances for reactor and dilution tank with automatic charge valves.
- Charge equipment with solid raw material with bag and biobag discharge unit, feed hopper installed on a tank balance for reactor and hopper discharge systems like screw feeder or rotary valve.
- Reaction equipment with reactor, reactor agitator and distillation system.
- Reaction equipment with vacuum pump
- Heating and cooling circuit with circulation pump, heat exchanger and control valves.
- Dilution equipment with dilution tank, agitator and reflux condenser
- Filter equipment with produt pump and product filter.
- Sample batch laboratory plant.
- Process control equipment and instrumentation with data Loggers. PID Controllers and control boards for all equipment with alarm systems.